All Ads

We have 19 adverts and 1 completed so far in July 2026
19 For sale adverts and of these 1 have sold.
no Wanted adverts and of these none found what they needed.
no Information adverts and no Thank you posts.

Last approved: Tuesday 14th July 2026 at 18:46
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

Details:
Dewhurst forward/reverse drum switch in great condition fitted with brand new stainless steel contact rollers & gland nuts.
The bronze contact springs are in clean non pitted condition.
These switches were fitted to myford lathes as original equipment.
Also comes with copy of Dewhurst wiring diagrams.

Details:
Genuine Myford milling slide & vice in good order.
Slide has the more desirable double bolt fixings,more secure.
Vice has floating jaw,Tommy bar & brand new fixings.
Slotted face ofslide is in great condition.

Details:
Boxford Lathe Metric Thread Dial Indicator with Block

Details:
Boxford Metal Lathes For Spares - £100.00 Each
Model CUD

Details:
I have about 150 blades for a scroll saw in bundles of10 . No use to me There are different tooth pitches but mainly fine pitches about 20 coarse ones. Blades have no pins.

Details:
I have 5 button dies that I think are for spoke threads. These are quite old look to be in good condition. Stamped Mathieson Glasgow. There is an 8, 9, 10, 11 and 13 G die. ILl post free them to U.K.

Details:
Tapping attachment in good working order complete with working instructions and in metal case.
Collection only from CO6 either in person or by your courier.

Details:
Three jaw chuck to fit Colchester Bantam or similar excellent condition and working order complete with reverse jaws and chuck key.
Collection only from co6 either in person or your courier.

Details:
A vintage Rotary Vibrating Rivetting Hammer for restoration.
Made by Turner Machine Tools Ltd of Birmingham.
Model R.H. 18, will set rivets up to a diameter of ¹/₈".
The machine was fully working when decommissioned, but will required the following before being able to work again:
The original foot pedal was snapped off; however, I have sourced a very similar pedal from an old hardness testing machine, which will fit with only minor modifications.
It is missing its original NVR starter and lo-vo light. I am able to supply a replacement Crabtree 'BD15' 415V NVR starter and a suitable modern Cutler-Hammer lo-vo lamp/transformer(415V to 25V/50V) at extra cost if required.
The circular flexible belt which drives the anvil rotation mechanism is perished and will need replacing with a length of suitable PU belting or similar.
The original flat leather drive belt is missing; however, the crown pulley's can easily be swapped for equivalent vee pulley's if so wished.
The motor, a Brook Gryphon 380/440V, 1/2HP, is currently removed, but is in perfect working order and merely requires bolting back into position.
The machine comes with a large selection of setting dollies to fit the upper virating/rotating anvil and the lower fixed anvil. The dollies are held in posion via a taper.
There is some side play in the upper, sliding/rotating, anvil,which would need further investigation and possible bush replacement in order to eliminate.
I cannot see me ever using this machine so am letting it go.
Throat = 3.25"
Working height between anvils with no dollies fitted = 24" (Nominally)
Overall height = 46"
Base footprint = 12" wide x 16" deep.
Approximate weight = 255lbs (116kg) (approx.2¹/₄ cwt)
Approximate weight with motor, guards and lower anvil brackets = 200lbs (91kg) (1 3/4cwt).
Asking £50, plus and additional £12 each for the Crabtree starter and lo-vo light unit if required.
Drop me a line if you wish to discuss further, or require additionl photographs.

Details:
6” Elliot rotary table/ indexing head.
Slight damage to 1 tee slot on edge and chuck is bolted to table with machine screws.
5” Pratt 3 jaw chuck with inside and outside jaws and key
Used but still very accurate, base repaired ( welded) when bolt mounting slots were damaged.
Chuck has a few drill and cutter marks but has had very little use, still concentric.
Very robust and well made.
Will courier or post but heavy item

Details:
Multiple available. Various condition.
-
Grade A: £75.00
Grade B: £45.00
Grade C: £30-35.00
-
Please contact me for more information. Lots of grinding accessories available including balancing mandrels and flange removal nuts.

Details:
A nice Bristol/Kennametal Erickson ER32 collet chuck in little used condition
INT 30 spindle taper.
M12 drawbar thread.
Part number QC30ER32060M.
Does have signs of light corrosion on external taper, but this will not affect its fit or function.
No longer required as I am disposing of my INT 30 tooling and Milling machine.
This one was a spare.
Postage at cost using your preferred delivery company.

Details:
This is a collection of s/s tubing that is now redundant. Many years ago used to make rigital readouts and sensors wer offered with telescopic s/s tubes as protection, most commonly for the Myford 7 lathe.
Material is a mix of 304 ans 316. Mostly from Tubesales who supplied to military tracability, but I no longer have any of the certificates.
Sizes are ¹/₄", ⁵/₁₆". ³/₈". ⁷/₁₆" and ¹/₂" by around 22SWG, 0.028" wall thickness. These would easily telescope in one another and then I formed stops to prevent the tubes pulling out of each other.
There are a few metric sizes, also some ex-military hydraulic tubes of varying diameter and shape.
The material is all new, just been stored for 30 years.
There are about 50 tubes with an average length of 2.7m plus a further about 25 tubes with an average length of 1m. So total is about 160m.
It is heavy and clumsy to move, probably a roof rack might not work without a supporting beam to tie them to.

Details:
Eclipse transfer blocks one pair 75 mm x 60 mm x 30 mm. Excellent condition and in wooden case. Collection either in person or your courier.

Details:
Magnetic chuck Eclipse. 10’’ x 5’’ table, excellent working order. Collection only from CO6 either self or your courier.

Details:
Rotary table 10’’ table in excellent working order. Collet from only either self or your courier.

Details:
A Kerry 5¹/₂" lathe with a gap bed. C/W fixed and travelling. 3jaw s/c..4 jaw independent faceplate catchplate etc. We had to disassemble this to get iit from bottom of garden up to my van. mostly reassembled . The original single phase 1400 rpm comes with it. There are two other motors both 850 rpm, with it. This is in my garage and can be rolled out onto my drve for loading onto a trailer or tail lift truck. Collection only please. No pallets or couriers. and cash on collection

Details:
Matched pairs, sizes 55x30x13 and 26x10x8. US made abec9 or P2 for us. I have 2 pairs of each size. These are £250 and £225 from a stockist.
Priced at 75 and 50 per pair

Details:
This is a quality SKINNER 6" Chuck - Model:906-1, and has a tight smooth action having had very little use as can be seen by the clean metalwork. The Thread of 1-1/2" x 8 tpi fits South Bend, Boxford, Atlas, etc. The Lathe I have just bought came with two 4-jaw Chucks, so one must go! The prices for such good Chucks vary widely, but am only asking £45 plus Postage.

Details:
Bought from Station Road Steam as 'new' in May 2020
Not had a lot of use and the battery is still good, it runs for a few hours.
Happy to take more photos and answer more questions. Can be demonstrated running.
I can deliver locally, 30 miles or so radius.