I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact details.
...
... STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE.
Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using flatbed Transit with rear mounted…
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.c......
!IMPORTANT!Images will now be resized automatically so you can upload any size and the system will wort out the resizing for you.
Not uploading images but still asking for people to email or ASK for them will get your advert removed.
13/06/2019 Update to the rules, please read them, breaking rules can get you banned for a time.
New: Scammers category added and in a nice neon pink, use their email and name not yours.
Email links are no longer clickable this has been done because the harvesters have found away round it.
DO NOT ask for offers or bids as the are trading laws about them and we don't track the offers and got involved in a case a few years back so we do not allow them at all. ONO is allowed because it is a based on a price and items. I.E. buying all the item for a lower price.
For those who find it hard to read, if you put just 1 in the price field it will ask if you meant to put -1 for the multiple to be shown instead.
We have 104 adverts and 28 completed so far in January 2020 74 For sale adverts and of these 26 have sold. 19 Wanted adverts and of these 2 found what they needed. 6 Information adverts and 4 Thank you posts.
Last approved: Friday 24th January 2020 at 8:49 Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk Read more...
Details: I know it's a long shot but I am looking for a vertical head for my Harrison milling machine any condition considered I would even consider part exchanging my Standard mill which is mint for a universal mill with a vertical head,
In nice condition and well looked after. Little used since purchased in 2014.
Comes with 3 and 4 jaws, drill chuck, centre, travelling steadies, faceplate, change gears, chuck jaws and Warco manual.
Warco DROs have been fitted along and across the bed and come with the Warco digital readout system. Please see the following page for details: http://www.warco.co.uk/digital-readouts-scales-dro/303110-warco-digital-readout-dro-display-counters.html
The lathe has not been used for some time, so all the slides and gibs will need to be tweaked.
I also have a set of pretty much unused Warco HSS and tipped lathe tools for sale. Please let me know if you are interested and we can work out a price.
Further details on the lathe can be found at: http://www.warco.co.uk/metal-lathes-metalworking-lathe-machine/15-wm-180-variable-speed-lathe.html
Collection only please. The lathe is a two man lift to move. I can give a hand but someone else will be needed to help move the machine from the back to the front garden.
More photographs available if required.
I also have a Warco milling machine for sale as well. Please see details on the Homeworkshop website.
In good condition and well looked after. Little used since purchased in 2014.
The mill has not been used for some time, so all the slides and gibs will need to be tweaked.
Comes with milling arbor chuck, metric collets and Warco manual.
Further details can be found at: http://www.warco.co.uk/milling-machines/31-wm-14-variable-speed-milling-machine.html
Please note that the table is the older shorter version.
I also have the Warco digital readout system and DRO scales for fitting. Details can be found at: http://www.warco.co.uk/digital-readouts-scales-dro/303110-warco-digital-readout-dro-display-counters.html. These are being sold separately, so please let me know if you are interested and we can work out a price.
Collection only please. The mill is a two man lift to move. I can give a hand but someone else will be needed to help move the machine from the back to the front garden.
More photographs available if required.
I also have a Warco lathe for sale as well. Please see details on the Homeworkshop website.
Details: Looking for a 240v floor standing pillar drill (Medding, etc type) in full working order, cash waiting and will pay and collect up to about 75 miles radius of Leyland/Preston. Not to expensive and he wants to plug it in and use on a job he has for it. Contact Peter with details and to arrange a deal/collection. Thanks for looking and hope you can help.
Contact: peter calvert Preston/Leyland PR25 UK 01772 421405
Details: Hi I am looking for a ex forklift truck dc traction motor and controller .Ideally about 40 KW and 80 volts but anything considered Thanks Mike
Contact: Michael Smith Leominster Herefordshire HR6 UK 07921254225
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ... Read more...
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
Thanks to this site I now have an Aciera F3 milling machine however I am now looking for a high speed head to go with the machine. Also, I am after a centering scope. Machine has a W-20 spindle as used on Schaublin lathes I believe.
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ... Read more...
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Details: Reluctant sale due to impending house move of my Colchester Triumph Lathe. 7" swing (14" diameter) over bed with a 11" swing (22" diameter) over gap piece. Correct original gap piece fitted. Complete with Pratt 8" 3 jaw chuck with internal and external jaws and chuck key. 12" face plate, Colchester travelling steady and Jacobs chuck for drilling New 2.2Kw motor (3HP?)single phase 240V fitted with forward/reverse, emergency trip and no volt reset. 8 speeds from 80rpm to 1485rpm when fitted with standard 4" triple belt motor pulley and 120-2225 when fitted with 6" pulley included. TPI from 4 to 56 in 32 ranges. Power X & Y travel. Some carbide tools included. Can assist with loading as have JCB loadall handy.
Terms: Price: £1,250.00 Collection Only
Contact: David Child Stewarton KA3 UK 0777 306 1745
Details: The KX3 was the first CNC miller I bought back in 2009.
My machine has run for well over 2000 hours and has been very reliable, but I strongly advise users to check the hidden Z damper ram by taking the back off from the Z pillar.
All was great until the damper (it's a car tailgate sort of thing) fitted to the carriage came adrift. The ram unscrews itself out of the lug which holds it in place at the top end, leaving it free to float around.
As the Z comes down it pushes the end of the floating ram down until it reaches a point where it jams, stalling the Z motor. The ram then shot out sideways and the Z carriage jumped down, and that’s how my lower limit switch got broken.
At the moment I'm lucky to be getting help and advice on the resulting electronic problems from very kind people who saw my earlier request, I have other machines to cover my work but I do miss the KX3.
Details: Circular metal Cut-off saw. Fully working. 11" (275mm)Dia. 400-440 Vac, 3 phase, 2 speed. Mitre cutting 45deg each side. Quick action vice. Bar rest and roller. 2 bar stops. Built in coolant tank and pump. Coolant system requires new plastic tube. Fully guarded. Fitted wheels and handle for moving. Comes with tools and 4 blades all in good condition. Motor recently rewound and new drum switch fitted. The asking price is the cost of the rewind. Weight approx. 200Kg
Details: Wanted - Harrison M400 or M350 cross feed hand wheel, hopefully someone can point me in the direction of a used cross feed hand wheel for either of these lathes? They are obsolete from the makers unfortunatley.
Details: I am a 22 year old model engineer trying to find a bridgeport milling machine to start off my work shop. Have a smallish budget but will consider any bridgeport milling machines.
Details: Anyone out there with knowledge of theodolites as I am looking for info on a latest purchase a "Rank Precision Industries" ST156-5 - which seems to be a development of the Hilger & Watts Microptic. Would be pleased to hear from anyone who has brochures/manual/ or even knowledge.
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ... Read more...
Details: Model 400 / 600 industrial blast cabinet (4ft wide) with Type 40 dust collector. Was dismantled a while back for refurbishment and hasn't as yet been painted and reassembled. Many new parts purchased including blast gun, nozzle, hose, door seals, gloves, window and rubber seal, visors, perforated sheet for floor, filter bags, instruction manual plus a used moisture extractor. Around £400 spent on parts (at 2005 prices) not to mention the original purchase price. Need the the space and haven't time to finish it so selling for £375 ovno. Contact me if you are interested and I will get it moved from where it's stored and take some photos.
Terms: Price: £375.00 Collection Only
Contact: David Bateson Ulverston LA12 UK 01229861130 or 07762614341
Details: Meyer and Burger model K preferred with the shorter bed. Must be in good , sound usable condition. Must have basic accessories to be able to turn , mill and drill etc.
Details: Hardinge HLV-H precision toolroom lathe. Serial number dates it to 1961. 3 phase electrics. Imperial machine with the following equipment:-
Metric screwcutting quadrant and change gear set 3 jaw s/c chuck (worn) 4 jaw independent chuck Multifix toolpost with 4 holders 5C collet closer Bed stop Work light Range of step chuck closing rings and a good selection of step chucks.
Good points:- Spindle, motor, speed control, 5C collet closer, screwcutting gearbox, cross slide & tailstock all working correctly.
Bad points:- Bed has some wear and the carriage gets tight towards the tailstock. Power feeds not working. 3 jaw s/c chuck is worn and needs replacing.
£1500 ono.
IMPORTANT - the machine MUST be removed from the premises in Hemel Hempstead by the end of January and may be viewed/removed during normal office hours. There is no forklift available on site so I would suggest a professional machinery mover be employed.
Terms: Price: £1,500.00 Collection Only
Contact: John Bennett Hemel Hempstead HP2 UK 07510870778
Details: This is a Myford ML7 lathe bed - in good condition. There are a few minor marks at the headstock end of the bed, but, otherwise, it's good - there is little wear (a saddle slid easily from one end to the other without becoming either tight or loose). Obviously it's collection only (there's no way I can post this!) - I'm about 25 miles North of York
Terms: Price: £25.00 Collection Only
Contact: Simon Oldfield Helmsley, North Yorkshire YO62 UK 01439 771818
Details: Bed , headstock and base plate for a Pultra 17/50 watchmakers lathe. Spindle turns freely and is a good start for anyone building a small lathe.
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk Read more...
Details: Clarkson Autolock Chuck, 40int taper, S type, drawbar thread 5/8 NC with 4 standard imperial collets 1/43/81/25/8. Chuck is in very good condition.
Details: Bridgeport Head Mounting Bracket for the mounting of J heads and Slotting/Shaping attachments to horizontal milling machines This one came from an Adcock and Shipley 2E horizontal milling machine fitted with a slotting/shaping attachment, bracket now surplus to requirements.
Slotting heads will mount directly to the bracket but a minor modification to the flange plate and the acquisition of the relevant gear will be required to mount J heads, see photograph. Gear available from Ebay.
Heads will be mounted vertically and can be rotated either side of vertical for angular positioning.
Item is heavy so would prefer collection but ring to discuss.
Details: For sale on behalf of my deceased friends widow.
1. Myford Series 7 Manual by Ian Bradley. Classic book covering ML7, ML7-R and Super 7
In perfect condition. £5 plus £3 postage
2. Milling Operations in the Lathe by Tubal Cain Workshop Practice Series No. 7.
In excellent unmarked condition. £5 plus £2 post
3 . Welding by Eric Simons 1965 hsrdback. 141 pages covering basics of arc and gas welding plus brazing and soldering. From the Mechanical Age series .
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ... Read more...
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
Details: Recent single phase motor. 8" Pratt Burnerd three jaw chuck with internal & external jaws. 10" four jaw chuck but no back plate. 54-1200 spindle speeds. 4 way toolpost. No 3 MT tailstock. Comes with coolant pump, but not fitted & not seen working. Can be seen running.
Details: This is a JinShin 240vac 3hp single phase motor for the Taiwanese (Bridgeport style) vari-speed knee milling machines (with vari-speed sheaves)
It was working when replaced (with 3ph and vfd) and is probably the simplest way to get a J head knee mill to run single phase without phase rotary converter or VFD.
The vari-speed bearings and key were recently renewed but the keyway itself is a little wallowed out (I was going to braze this up and recut it if I refitted the motor)
Details: I particularly want larger sizes in Imperial or any metric. I have plenty of duplicates to swap if preferred. These collets are of the dead length style with a back bearing of 7/8"; very similar to M99E, but both the back bearing and especially the nose of those are too large.
Contact: Nick Kempley Bridgend CF31 UK 07846655998
Details: I am looking for some new push button switches for my Harrison M350 lathe. I've been in touch with 600 Group who have no spares left (Obsolete).
The switches are from Yoshida Electric Industrial Co. LTD and these are the types I'm looking for;
Details: Having a sort out and found these Truegrip collets (not 5c)lurking in the back of a cupboard, now surplus to my requirements. These collets are for the 5" Truegrip chuck. 1/43/87/16 x 2 as per photograph. £5 each.
Details: Lovely machine in full working order. 1950s vintage. 3phase motor working of inverter so 13amp plug in. Has all the equipment you might need. 2 9in face plates. 2 4jaw chucks 5in and 4in 2 3jaw chucks 3in and a 160mm dia TOS 3jaw. inside/outside and soft jaws. A never used catch plate.Traveling steady and fixed steady. Also a shop built boreing table.Mc is on castors for easy move to roadside. weight is about 500kg so need heavy tail lift or tow onto pick up truck. email for more pics and info.
Terms: Price: £470.00 Collection Only
Contact: Paul Robbins Peterborough PE1 UK 01733 565522
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ... Read more...
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Details: Bridgeport milling head set up with Teco inverter Running via a remote pendant.
Includes the digital vernier. Motor was rewound in 2017 by the previous owner for use with a vfd. Everything works as it should, spindle feeds, back gear etc.
Could potentially palletise for buyer to arrange their own collection.
Details: Clarke powered hacksaw, has a fair bit of age to it and is suprisingly well built for a clarke machine. was given it a few years ago but its surplus to requirements, in good working order with a new blade a couple of spares. Located in Stockport, can deliver locally, sensible offers invited.
Terms: Price: £120.00 Collection or Delivery
Contact: Ashley Smith stockport sk42 UK 07907589738
Details: Double swivel Myford vertical slide. 125mm x 100mm table. Looks to be in very good condition apart from someone has run a tool into the table and scored it. see pictures.
Terms: Price: £60.00 Postage: £16.00 Collection or Post
Contact: Steve Flint Scarborough YO13 UK 07770636429
Details: set of drawings & instruction book, for 5 inch gauge L.B.S.C Pansy tank loco.unmachined castings, wheels, dome, chimney, g.m axle box strip, cast iron cylinder block pistons etc, motion plate, smoke box front & rear ring, set of piston rings, Model Engineer laser water cut expansion links, brake hangers, connecting rods & coupling rods, copper boiler material, main barrel, all tubes, also flat copper plate
Details: Clarkson Autolock Chuck. 4 Morse taper, S type, drawbar thread 5/8 BSW with 4 standard imperial collets 1/43/81/25/8. Although the spanner appears to have had some service the chuck does not and is in very good condition. Colection or postage at cost.
Details: An 8" slim body Burnerd 4 jaw chuck opn a D1/3 Camlock backplate. £50
Its heavy, so collection only from near Worcester.
An 11" faceplate with a D1/3 Camlock mounting. Its been very neatly drilled for a fixture, but apart from that is unmarked - see photo. £40 plus postage, probably about £10
Terms: Price: Multiple Collection or Post
Contact: Richard Wilson Worcester WR7 UK 07913 849846
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk Read more...
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ... Read more...
Details: I am disposing of the Model Engineer magazines I have taken and/or acquired. These are sold as a job lot only. Early issues up to recent .looking for £100GBP o.v.n.o. Collection only because weight is expensive.
Details: Hi. If anyone is interested, I have a rarely used 50 litre, 3hp Workzone air compressor for sale. It's about 3 years old and works perfectly. Collection only from south Birmingham. £65.00 for a quick sale, or make me a sensible offer.
Details: Height Gauge 12 " boxed. Condition is Used. Collection only, very heavy
This Height gauge has been in our Engineering workshop for many years. We have now closed and therefore selling. Vintage piece, 12 inch . Box needs cleaning as has been open to workshop environment but vernier always kept inside and therefore in really good condition. Lovely piece of history but also has been used up until very recently
Details: An excellent example of a Mitutoyo Digital Micrometer. 6 to 12 inch, .0001 0.001mm
Optional Digital or Manual
Hardly used, extremely good condition, been kept very well in a heated workshop, (but in the office), you can see very faint scratches on the top of the box and a slight crease to the right of the Zero/ABS, Red button by the digital display.
6 Gauges, 6 to 12 inch for calibration 6 Anvils
Hard to find one as good as this second hand. Sold as seen.
£250.00 or best offer including posting insured and signed for)
Details: Is there anyone in this group capable of repairing the XMT2315 pcb of my Sieg C1 mini lathe?At least one component, a diode, has failed and I have no schematic to help identify which one it is. Wish I knew more about electronics as a replacement board is £100 !
Details: A pair of Mercer 0.0005" Dial Gauges - one larger than the other (approximately 56mm dia. and 42mm dia.); the smaller Gauge still has (what I assume) is it's original box. The larger Gauge has a smooth action, however the smaller Gauge is usually a little sluggish from the full plunger travel position - part travel settings seem fine though.
There's only so many Dial Gauges a guy needs, and I have more than enough....
Happy for collection or will post via Royal Mail 2nd Class signed for.
Terms: Price: £10.00 Postage: £4.00 Collection or Post
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk Read more...
Details: To Wilson but also to help anyone with a similar enquiry.
I would suggest contacting the Department of Trade & Industry, probably via its web-site.
The DTI (and others such as the HSE) published and I think still publishes practical manuals to help business owners and managers, and others who are not lawyers, follow the regulations.
It will be up-to-date, impartial and reliable information, too.
As a guide, I have copies of the original Pressure Equipment regulations and the HSE or DTI's corresponding manual. The Regs are in legalese, the manuals in proper engineers' English!
I suggest also reading the specifications small-print in the instructions bundled with CE-marked, fairly-similar equipment; to gain an idea of the approvals your work may need.
It may be an expensive and bureaucratic business. Samples of the item intended to be "by way of trade" need to be tested as meeting the relevant legal standards, by an independent laboratory a "notified Body" in EU-ese. The lab may also need copies of design calculations, drawings etc. too, to show it was designed from the start to meet those criteria.
Details: This is a long shot, but I am wanting to add a wood turning lathe to my workshop. Ideally, I would like a ELU SP2000, however, I would consider other makes provided they are bench mounted. Thanks in advance.
Contact: David Lewthwaite Fareham PO15 6AH UK dw.lewthwaite@ntlworld.com
Details: 30 " stillsons and bench mounted chain type pipe vice .Both Record Brand . Both of these look to be in good condition and hardly used . collection only please .Delivery may be possible locally ,or even meet halfway ?
Details: Knee brace and arbour support from Victoria U2 milling machine . Will probably also fit U1 and various other victoria and elliott mills ..Heavy and awkward so collection only please . Though delivery or meeting halfway may be possible ?
I am the grim reaper I will clear your home workshop for cash ,sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7, ML10 Lathes.Other small lathes and milling machines wanted The good, the bad or the ugly. Read more for contact ... Read more...
STEAMPLATES produce high quality polished and enamelled name plates etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48". Reproduction steam related name and other plates can be made to FULL SCALE. We also ... Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed. Now using ... Read more...
Details: The machine is Mk1 with a 3 phase motor, along with a starter incorporating 'no volt' release. It is as shown in the photograph and does not have any attachments with it. It does need a belt guard, and bit of a clean up. The table slides freely. The machine can easily be dismantled into three pieces which individually are quite light to lift; and the whole lot will easily fit into the boot/back of most cars/hatchbacks. Buyer must collect, please.
Details: This outfit was a present last year and has only been used once to try it out but unlikely to get used by me anymore. It consists of a Voilamart Gravity Feed Air Brush and Compressor kit and a cleaning jarwith brushes neede and nozzle spanner.. Great little outfit in perfect condition. Collection preferred but could be posted at cost (estimate £8)
Terms: Price: £25.00 Postage: £8.00 Collection or Post
Contact: Colin Wilson Norwich or Cromer NR11 UK 01263720528
Details: Looking for two cast iron blanks to make 51/2 inches diameter x 1 inch thick and 1 to make 7 inches diameter x 1 inch thick. can have holes in middle. Please let me know what you have.Thanks. Graham.
Contact: Graham Gardner Gloucester GL53 UK 01242 580548 + 07870900332
Details: I've owned this turret mill for about 20 years and it has always been a 'go to' machine. Still in use a week or so ago. But I now have more specialist machines that can do everything it can and I'm running out of space, so it needs to go. I fitted an Align drive to the X axis which I find ideal for doing keyway slots in bars because of the electric stops where many mechanical stops have too big a minimum distance. The machine was made in 1956 and somewhere Ihave the original paperwork. Single phase with integrated inverter to 3 phase motor.
Not listed with tooling, but some probably available at extra cost when collected. Collection only unless you're very local.
Open to sensible offers.
Terms: Price: £500.00 Collection Only
Contact: Nick Kempley Bridgend CF31 UK 07846655998
Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.
By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.
We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.
In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.
We do not sell, hire, share or give out your email address.
The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.
So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new and repeat visitors. It does not have any detail on who you are.
Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.
All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.
This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales.
Donate
Want to help us fund the site and time spent by the people behind it then use the button below.
We are not a registered charity so you can't claim it back but it helps pay for the costs of running the site and improving the features.
You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.
All Ads
Fri 24th Jan '20 
