Jurassic Tools Ebay shop here:--https://www.ebay.c... Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. ...
Want to help us fund the site and time spent by the people behind it then use the button below.
We are not a registered charity so you can't claim it back but it helps pay for the costs of running the site and improving the features.
You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.
We have 31 adverts and 4 completed so far in October 2025 23 For sale adverts and of these 4 have sold. 6 Wanted adverts and of these none found what they needed. no Information adverts and 2 Thank you posts.
Last approved: Tuesday 14th October 2025 at 12:41 Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: A 12" length of 4" diameter "Meehanite" cast iron bar. Continuously cast, no blow holes or internal defects and lovely to machine. Remainder of a piece which I bought over 25 years ago and forgot I still had! Asking £75, which is well below current supplier prices. I may be prepared to cut into smaller lengths if no interest shown in buying the full 12". I also have some 2" diameter Meehanite (not shown in photos) which I am asking £30 for a 12" length, or smaller lengths for a pro-rata price. Collection only, as postage for 4" bar would be very expensive. May be possible to post the 2" bar. Postage would be at cost. Alternatively, I could deliver to the Midlands ME exhibition on Saturday 18th October.
Details: The Granville horizontal milling machine was largely almost identical to the Centec 2 machine except for a few minor details. Indeed I think they used the same castings! Where the Granville machine was significantly different was in the provision of belt guards on both stages of the drive. Does anyone out there have these guards lying about as many were taken off the original machines so that speed changes could be effected more easily. I have a Granville machine lacking guards so would dearly like to purchase any that are surplus to requirements.
Contact: Richard Hersey Crewe CW2 UK +44 (0)7500657357
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: Anybody have a pair of Stevenson's ER32 hex and square collet blocks for sale, or know of a supplier in the UK? Arc used to sell them but they've unfortunately stopped trading. Also, I'm looking for a small bench top milling machine, such as a Sieg 2.7 or 3. Will consider something requiring repairs to controller or motor etc and in need of general tlc. Please get in contact if you can help.
Tools & Parts (Small tooling) Renovate (Complete but not finished)
Details: An Archer 2MT to 1MT quick change drill chuck. Very well made and smooth to operate, but has some fine stress cracks to edge of socket as per photo. May be useful for spares or repairs.
Terms: Price: £10.00 Postage: £4.00 Royal Mail Only
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Tools & Parts (Small tooling) Old Stock (New but storage spoil)
Details: Unused. Still in box with original delivery & guarantee note. 220 vac Single phase with gearbox 1/4 hp 2800rpm shaft, 56 rpm output Motor shaft D.E. 3rd Bearing Type Stator Cover D.E. T.Enc. Gearbox specs Final shaft D.E. Metric (S.F.) Sent from Ireland by Evri
Terms: Price: £18.00 Courier: Free Courier/Delivery Only
Contact: David Everett Skibbereen P81 Ireland 00353 83 414 4378
Details: This is a Rishton milling column and head from their bench milling machine but also as used on the Harrison M250 and M300 lathes. I bought it many years ago in a clearout sale. It was new and unused but a spare that had been dragged around for several years, so that is why it looks a bit scuffed. I have run it, powered from 400V three phase, and runs fine on all its speeds. The motor is dual voltage so if you have an inverter then should run ok, I have three phase so used that. Whilst it has run, it has never cut metal. Geared headstock, 0.33hp, speeds 2000/1100/700 and 370/200/130 rpm. Spindle has 2mt fitting. The head has a swivel fitting to the column with a screw thread rise and fall with clamp screws. Bottom of column, 3" diameter, just fits into either the mill base or the lathe support bracket, there is no bracket with the head. Will need to be collected, heavy.
Details: I have a full size large car engine that needs the main bearings bored so I am looking for a line boring kit. Typically these have 3 adjustable supports carrying bearings for a plain shaft into which cutters are inserted (1 bearing at a time). The shaft is rotated by hand or small motor and end feed applied either by hand or autofeed. There were many manufacturers - the photo lifted from the web shows an American version. I work so evenings/weekend best - the answer machine doesn't like the digital BT so keep trying until we get human-human contact. Gary
Contact: Gary Of Ashfield Bristol BS36 UK 01454 773902
Details: Wissota --a quality american make- complete with a cast iron stand. This is a 110volt machine and comes with a transformer. It has very solid grinding rests, not the usual pressed bean cans you see on inferior makes. there are a selection of grinding wheels , most of which appear to have v little use. Strictly collection only please,no couriers or pallets. I am only 5 or 10 minutes drive off the A1 ,so easy to find
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Jurassic Tools Ebay shop here:--https://www.ebay.co.uk/str/thetoolandtreasurechest Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. Read more...
Details: All components shown in the photographs are included but the motor needs to be mounted and connected up. The buyer must take responsibility for removal and collection. Any sensible offer will be considered.
Terms: Price: £500.00 Collection Only
Contact: Elizabeth Kirkham PRENTON CH43 UK 07951921683
Details: Hi all i haven't been on here for a while, but I have managed to get machining in the garage again, working on a Stuart no9 I bought through here a while back. Anyway, the drawings I have were bad copies and can't make out the text in places, I wondered if anyone would kindly have a set to share? Also looking for a set of Stuart Governor set drawings if anyone has any to share?, to be fair I would love any Stuart drawings as plan to build more models in the future. I would of course cover any costs incurred, I just can't justify paying the Stuart Models prices for a piece of paper. Regards
Contact: Mark Slater liverpool l35 UK 07879 301479
Details: Materials now surplus to requirements. Aluminium alloy 6082 T6 as follows. 9"x 4.5" dia; 12"x 3.5" dia; 12"x 3" dia; 6"x2" dia. £100 the lot but would consider splitting. Collection preferred due to my inability to now handle weights but would consider courier if absolutely necessary.
Machines (Large Tooling) Renovate (Complete but not finished)
Details: Selling my late fathers Myford ML7 Lathe. This was my dad’s and has not been used in many years. I believe its single phase. There are multiple tools available and also some wood turning tools which have not been photographed. This is currently located at my mums house in Wiltshire. I would need to arrange with anyone interested a date and time that would be suitable for purchase and collection as I will travel from Gloucestershire for the transaction.
Terms: Price: £300.00 Collection Only
Contact: Jonathan Price Salisbury SP4 UK 07969099521
Details: 13/16" Dia x 103/4" L.. 1/2"x 1/8"x 105/8"L.. 1" x 3/8"x 103/4"L.. 1" x 3/4" x 71/4"L.. 11/2" x 3/4" x73/8"L.. 3/4"x 5/16" x 8"L..1"x3/8"x9"L (2off) 1/2"x1/4"x71/2"L..1/2"Dia x 71/2"L..3/8"Dia x 12"L (6off). ITEM 2. 2 off Folded 1.5mm thk St St. Size. Max width 30mm, Height 19mm, slot width 8.1mm. Length 390mm. Shown with a M10 screw fitted. 25mm Dia S/S bar 225Lg & 1/2" Dia rod S/S rod 245Lg
Terms: Price: £6.00 Postage: £4.00 Collection or Royal Mail
Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.
By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.
We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.
In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.
We do not sell, hire, share or give out your email address.
The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.
So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new and repeat visitors. It does not have any detail on who you are.
Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.
All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.
This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales.
All Ads
Tue 14th Oct '25 
